Differences

This shows you the differences between two versions of the page.

--- products:approach-training [2017/10/25 14:32]
Andreas Breitschopp
+++ products:approach-training [2017/11/02 18:43] (current)
Andreas Breitschopp [Options]
@@ Line 56: / Line 56: @@
 If the runway is ILS enabled the correct altitude above ground will be calculated using the runway-specific glideslope degree. Otherwise the default of 3° will be used.
-All parameters like distance to landing point for the two final positions, distance for the base positions or altitude above ground for the downwind positions can be configured in the [[features:settings#position|Settings]] module.
+All parameters like distance to landing point for the two final positions, distance for the base positions or altitude above ground for the downwind positions can be configured in the [[products:approach-training#position|Settings]] module.
 ==== Helipads ====
@@ Line 86: / Line 86: @@
 Choose one of four pre-defined flight levels to start your airworks.
-Of course, also these altitudes can be easily changed in the [[features:settings#airworks|Settings]] module.
+Of course, also these altitudes can be easily changed in the [[products:approach-training#airworks|Settings]] module.
 ==== Custom Location ====
@@ Line 128: / Line 128: @@
 Here you can find several options like speed and gear/flaps status that are used when placing the aircraft.
-All options are saved upon change and can even be defined on a per-aircraft level when aircraft profiles are enabled in the [[features:settings#options_on_position_change|Settings]] module.
+All options are saved upon change and can even be defined on a per-aircraft level when aircraft profiles are enabled in the [[products:approach-training#options_on_position_change|Settings]] module.
 :i: Note: When aircraft is placed on ground gear is always extended and ILS frequency can only be set obviously if the runway is ILS enabled.
@@ Line 218: / Line 218: @@
 ===== Settings =====
-==== Position ====
+==== Approach Training ====
 These settings are related to the [[products:approach-training]] module.
@@ Line 224: / Line 224: @@
 === General ===
-{{https://www.fs-flightcontrol.com/img/manual/features/settings/position-general.png?nolink|}}
+{{https://www.fs-flightcontrol.com/img/manual/steam/approach-training/settings-appraoch-training-general.png?nolink|}}
 You can enable or disable some automatizations after an aircraft position is changed.
@@ Line 276: / Line 276: @@
 This includes whether the heading, course (CRS) respectively omni bearing selector (OBS) or ILS frequency (if the runway is ILS enabled) should be set automatically with the aircraft position change to a certain approach.
+==== Landing Analysis ====
+These settings are related to the Landing Analysis module.
+=== Color Settings ===
+In this area you can customize all colors used to draw the statistics graphs.
+{{https://www.fs-flightcontrol.com/img/manual/features/settings/statistics-colors-type.png?nolink|}}
+All colors can be defined per display type.
+Therefore please first select if you want to change the colors for the normal in program display or for printout.
+== Revert to Defaults ==
+{{https://www.fs-flightcontrol.com/img/manual/features/settings/statistics-colors-revert-to-defaults.png?nolink|}}
+You can easily revert all colors to their defaults by using the ''Revert to Defaults'' button.
+== Colors for Display Type ==
+{{https://www.fs-flightcontrol.com/img/manual/steam/approach-training/settings-landing-analysis-colors-table.png?nolink|}}
+Here all currently defined colors are displayed for the selected display type.
+Click on any of the button to select a different color.
+=== Print Options ===
+{{https://www.fs-flightcontrol.com/img/manual/steam/approach-training/settings-landing-analysis-print-options.png?nolink|}}
+For statistics printing you can define here which printer should be used.

User Tools

Site Tools

Differences

Page Tools