User Tools

Site Tools


Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
products:approach-training [2017/10/25 14:43]
Andreas Breitschopp [General]
products:approach-training [2017/11/02 18:43] (current)
Andreas Breitschopp [Options]
Line 56: Line 56:
 If the runway is ILS enabled the correct altitude above ground will be calculated using the runway-specific glideslope degree. Otherwise the default of 3° will be used. If the runway is ILS enabled the correct altitude above ground will be calculated using the runway-specific glideslope degree. Otherwise the default of 3° will be used.
  
-All parameters like distance to landing point for the two final positions, distance for the base positions or altitude above ground for the downwind positions can be configured in the [[features:settings#​position|Settings]] module.+All parameters like distance to landing point for the two final positions, distance for the base positions or altitude above ground for the downwind positions can be configured in the [[products:approach-training#​position|Settings]] module.
  
 ==== Helipads ==== ==== Helipads ====
Line 86: Line 86:
 Choose one of four pre-defined flight levels to start your airworks. Choose one of four pre-defined flight levels to start your airworks.
  
-Of course, also these altitudes can be easily changed in the [[features:settings#​airworks|Settings]] module.+Of course, also these altitudes can be easily changed in the [[products:approach-training#​airworks|Settings]] module.
  
 ==== Custom Location ==== ==== Custom Location ====
Line 128: Line 128:
 Here you can find several options like speed and gear/flaps status that are used when placing the aircraft. Here you can find several options like speed and gear/flaps status that are used when placing the aircraft.
  
-All options are saved upon change and can even be defined on a per-aircraft level when aircraft profiles are enabled in the [[features:settings#​options_on_position_change|Settings]] module.+All options are saved upon change and can even be defined on a per-aircraft level when aircraft profiles are enabled in the [[products:approach-training#​options_on_position_change|Settings]] module.
  
 :i: Note: When aircraft is placed on ground gear is always extended and ILS frequency can only be set obviously if the runway is ILS enabled. :i: Note: When aircraft is placed on ground gear is always extended and ILS frequency can only be set obviously if the runway is ILS enabled.